New product


Very white powder to be mixed with water for the manufacture of models, reliefs and reproductions. Synthetic composite for realization of statues, ornaments and friezes.

More details

19 Items

15,75 €

Tax included

Consegna: da 1 a 3 settimane

By buying this product you can collect up to 2 loyalty points. Your cart will total 2 points that can be converted into a voucher of 0,80 €.

More info

MARMORIX is a quality powder mixture of high white to be mixed with water to obtain a plastic casting mass for the manufacture of reproductions, models and reliefs. The compound is widely used in the creation of statues, friezes and ornaments in general.

Composed by casting inside molds / molds made of SILICONE RUBBER or ALGINATE.


Absence of harmful substances for the user (eco resin).
Highly white color.
High precision and definition of details.
Structure of hardened forms similar to porcelain.
Fast hardening without additives.
Easy workability.
Air drying, does not require cooking or drying.
Coloring in mass or surfaces using pigments and colors.


Pour the MARMORIX powder into the indicated quantity of water and mix well for about a minute until the mass thickens. For large quantities of product we recommend the use of electrical / mechanical instrumentation such as an agitator.

Pour the mass inside the molds slowly enough to avoid excessive air bubbles.

After 15-20 minutes from the beginning of the casting, it is possible to turn the object out of shape. Initially, the object created has a high temperature, but in a short time it will tend to cool (it is advisable to deposit the object in such a way that it is well ventilated in all its parts so as to favor uniform and complete drying).

After hardening (after about 8 hours), the surfaces can be treated with colors or acids.

The complete drying cycle will be complete after 48-72 hours with a recommended temperature of about 40 ° C.


The surfaces, after drying, can be decorated through the use of colors or varnishes for water-soluble acrylic covering coatings.


It is important to use only pure and not excessively cold water. Work the product inside clean containers and be careful not to exceed the processing time described.

The product must be stored in a dry place and in tightly closed containers that are moisture-tight.

Data sheet

Size500g / 1Kg
Mix RatioPowder / water: 2.8-3.5 Kg / Lt (about 35.7% - 28.6% of water on the weight of the powder).
Processing time8 Minutes
Setting time15-20 minutes
Hardnessgreater than 300 N/mm2

Write a review

Glossy Snowflake Mold

Silicone rubber mold represents a super shiny snowflake for casting with epoxy resin, polyurethane resin or liquid plaster. It has a through hole for key rings, ropes or hooks.



Questo sito fa uso di cookie per migliorare l’esperienza di navigazione degli utenti e per raccogliere informazioni sull'utilizzo del sito stesso. Utilizziamo sia cookie tecnici sia cookie di parti terze per inviare messaggi promozionali sulla base dei comportamenti degli utenti. Può conoscere i dettagli consultando la nostra privacy policy qui. Proseguendo nella navigazione si accetta l’uso dei cookie; in caso contrario è possibile abbandonare il sito.