New product
Do you need a quick release resin? HobbyFast is a fast hardening transparent resin about 4 hours. This multipurpose epoxy casting resin allows you to make casts from 2 mm to 1 cm and which can be demoulded in a short time. It can be used neutral or colored and the main methods are by casting or brush. + FREE SHOVEL AND GLOVES KIT!
By buying this product you can collect up to 2 loyalty points. Your cart will total 2 points that can be converted into a voucher of 0,80 €.
HobbyFast is a multi-purpose transparent epoxy casting resin (jewelery, DIY, bijoux, polishing, etc.) with quick demoulding with application by casting or brush. +FREE SHOVEL AND GLOVES KIT!
The peculiarity of this resin is the polymerization speed (compared to traditional traditional epoxy resins) which allows to obtain a demoulding of the piece from a mold in a shorter time. The demoulding time of the casting will depend on the thickness of the casting (min. 2mm - max. 1cm) and on environmental factors (mainly the temperature). Complete hardening will take longer.
HOBBYFAST MAIN FEATURES:
The ductility of this resin allows it to be used in a variety of different sectors, activities and processing methods. Mainly the compound finds perfect application in:
It is mainly used: for casting in silicone molds, for polishing objects or as a creation in itself (rings, pendants, bracelets, earrings, cameos, etc.) of low thickness or to create more sophisticated objects with the incorporation of some objects (e.g. eg dried flowers).
The use is very easy, just weigh the two components with a scale respecting the ratio of 100: 50 (by weight), that is adding 50% of part B to the quantity of component A. Then the two components are combined and with a spatula must be mixed thoroughly, taking care to scrape the walls and the bottom well to obtain a homogeneous mixture throughout the mass. The workability time of the resin is about 5 minutes at 25 ° C.
To create a resin object, pour the liquid into a silicone rubber mold (min. 2 mm and max. 1 cm) of the desired shape, from which it will be easily possible to unmold once catalyzed.
The casting method is not the only one that can be used, in fact it is also possible to use the HobbyFast with a brush to obtain a low thickness surface (min. 2 mm). The formulation is self-leveling and once applied it will tend to uniform over the entire surface, eliminating the signs of the bristles.
The product has a release time of 4 hours (approximately at an average temperature of 25 ° C) and a complete hardening in the following hours, but remember that the temperature and the thickness of the casting have a significant influence on these times. Environments with temperatures (> 25 °) allow to obtain a demoulding and hardening of the casting in less time.
Important: do not mix large quantities of product and do not leave it in bulk for a prolonged time. Do not cast less than 2 mm and greater than 1 cm. We do not recommend using this product when outside temperatures are high enough.
Questo sito fa uso di cookie per migliorare l’esperienza di navigazione degli utenti e per raccogliere informazioni sull'utilizzo del sito stesso. Utilizziamo sia cookie tecnici sia cookie di parti terze per inviare messaggi promozionali sulla base dei comportamenti degli utenti. Può conoscere i dettagli consultando la nostra privacy policy qui. Proseguendo nella navigazione si accetta l’uso dei cookie; in caso contrario è possibile abbandonare il sito.